Genie AC And DC Screw Drive Carriage Assembly
Genie AC Screw Drive Carriage Assembly
Genie AC and DC Screw Drive Trolley Assembly. This is a common part to strip the teeth off when the door is not operation smoothly or the springs are out of balance. (Compatible for all Genie and Overhead Screw Drive Openers)
The easiest way to tell if your carriage is stripped is to engage the trolley or carriage and operate the opener, while it is running check to see if the screw in the rail is turning. If it is not turning then your coupler is stripped, if it is turning then this means your trolley is stripped.
|Dimensions||04 × 2.75 × 1.5 in|
Robert E. Jaquith –
The parts arrived promptly and in good condition. The fix was particularly easy and literally took less than 15 minutes to repair the opener. It’s working perfectly now.
jimmy brimmer –
the assembly works fine,after i figured out how
to install it on the screw drive
Scott Horsley –
Like factory item, lower cost! Will use again.