Genie Chain Glide/Chain Drive Gear

$6.25

Genie Chain Glide/Chain Drive Gear

SKU: 27096AS Category:

Genie Chain Glide/Chain Drive Gear (Compatible with all Overhead Python and Python II, Chain Drive and Chain Glide in the Pro Max and the Genie products)
To check to see if you gear is cracked you will need a 1/4′ socket to take the cover off of the motor head. Then there will be 3 other 1/4′ hex head screws holding the gear in place. Be sure to inspect the gear housing cover, these are bad for cracking too. Take the cover off and inspect the gear to see if it is split. If you have a busted gear, replace with the new one and reassemble in the reverse order.

Weight .16 lbs
Dimensions 3.5 × 3.5 × .5 in

Reviews

There are no reviews yet.

Be the first to review “Genie Chain Glide/Chain Drive Gear”