Repairing vs Replacing Garage Door Cable Problems: Which Is Right for You?

Many houses these days come with a garage. A lot of times we expect it and often get used to it working anytime we need it. We push that little button on the clip attached to our car visor and before we roll into the driveway well, the garage opens. 

What if it doesn’t? There is no need to panic because replacing a garage door cable is easier than you may think. Keep reading to find out how. 

Replacing a Garage Door Cable

Granted, garage door cable replacement is not something most people think about. We seem to give it serious thought only when it breaks and then we realize how important our garage door is. 

 If you are having problems with your garage door, you may be wondering, how does a garage door cable work? The cable is there to do the heavy lifting, so to speak. They carry the weight of the door and roll it over pulleys or onto a drum. 

When the garage door stops working some people think they need to call an expensive technician who is deemed an expert to come out and fix it.  Yet, with a little research and time, you too can be an expert in garage door cable replacement. All you need is a little patience and the right tools to do it yourself!

Repair or Replace

If you are trying to decide between hiring the repair or replacing a garage door cable yourself, it comes down to the problem and how bad it is. If you decide to replace the part altogether, do you know where to find the replacement?

It could be that the cable is giving you trouble due to loose hardware which will be easy enough to tighten and fix. If a cable is broken, it is best to replace it rather than try to repair it. 

Replacing a garage door cable is something you can do yourself and it may take less time and effort than you think. Since it takes anywhere from four to six hours to install an entire garage door opener, replacing one component will only take a fraction of that time. You could save it for a Saturday afternoon project and be finished in less than an hour. 

What About the Cost?

The average cost of garage door cable replacement is $15-$50 for the part. This is not too pricey if you do it yourself. If you pay a technician the labor that gets charged will be around $90-$350! 

Replacing a garage door cable yourself will save you a lot of money. It may take a little bit of your time but for thirty minutes’ worth of work, you could save several hundred dollars. 

If you are on a budget, or simply want to be smart about your finances, replacing the cable is a DIY job that can keep your money in the bank. This is especially true when you realize how much more you will pay for labor than you will for the replacement part!

Doing the Job Right

How many times have we heard how important it is to do things right the first time? There is a lot of wisdom in that because when you do something right you won’t have to spend time and money going back to fix it again. 

Replacing a garage door cable is no exception. You need the right tools and parts for the job. Before you start trying to replace your cable, check out our online videos that show you step by step instructions. 

You do not want to end up in the emergency room because you decided to fix something without doing a little research first. Garage door cables hold hundreds of pounds of tension so it is not something you do without first knowing how it works. 

You want to do any repair safely. It is important to remember that these systems hold lots of pressure and weight. The last thing you want is for the door to come crashing down while you are working on it. 

The Right Tools

When it comes to garage door cable replacement, you need the right tools for the job. This is not something to start on and hope that you have tools that will work, lying around in a toolbox somewhere. 

Check and make sure you know the tools and specific cable type you need for the replacement. This job can be done fast but only if you are not making trips to the hardware store to buy more tools. 

There are different types and sizes of cables so make sure you get the right one before you start the job. This will save you a lot of time and headache. 

You will need an adjustable wrench set, leather gloves, hammer, and safety goggles to start. The manual that comes with your garage door should show you the other tools you may need to do the job. These are the basics to get you started. 

Having the right tools will ensure the job gets done fast and right the first time. There is nothing worse than being in the middle of a DIY project and realizing you don’t have the items you need so you have to stop and hurry to the store to buy something else. 

Safety First

When it comes to replacing a garage door cable, you always want to be safe. Garage doors have lots of parts and they may be more complex than you think. 

These cables can be dangerous to replace if you don’t do it right. Take your time and don’t rush through it, especially if it is your first time working on it. 

Keeping your garage door cable in good shape is not hard but when it comes time to replace it, we can help. Check out our website for more information.

0/5 (0 Reviews)
Scroll to Top